Oct. 24, 2025
Every year, many people get hurt using automotive lifting tools. He should pick the correct tool, read the instructions, and use jack stands. This guide talks about safety at each step. They can stop accidents by using the right way and picking the right equipment.
• Always use jack stands after you lift a car. They give important support and stop accidents from happening.
• Check the weight rating of lifting tools before you use them. This easy step can stop injuries and keep you safe.
• Follow the safety checklist before you lift a vehicle. Regular checks keep tools working well and make things safer.
Automotive lifting tools are important for many repair jobs. Mechanics use them to lift cars for tire changes and brake checks. They also need them to look under cars or change oil. Suspension work needs cars to be lifted too. These jobs need strong support and good lifting skills. Using the right tools helps workers avoid getting hurt. It also makes their work faster and easier. Car lifts stop injuries from lifting or bending by hand. Shops use these tools to make work safer and better for everyone.
If you use automotive lifting tools the wrong way, you can get hurt badly. People can break bones, pull muscles, or get sprains. Sometimes, workers get trapped if a car moves suddenly. One time, a worker was stuck under a bus when a jack slipped. He could not work again because of his injury. Each year, more than 15,000 accidents happen from unsafe lifting. Most accidents come from heavy loads, bad tools, tired workers, or unsafe shops. Things can fall and hurt people’s bodies or heads. Being careful and picking the right tool for each job can help stop these problems.
There are many kinds of automotive lifting tools. Each one has a special job. Picking the right tool makes work safer and faster.
Floor jacks have a wide bottom and wheels. This helps them stay steady when lifting heavy cars. They let workers lift cars high enough to work easily. This lowers the chance of getting hurt. Most floor jacks can lift between 3 and 4 tons. Many have safety parts like overload systems and dual-piston parts. Floor jacks are used a lot in shops because they fit many cars.
Bottle jacks are small but strong. They can lift heavy cars even though they are tiny. These jacks are good for tight spots. They are easy to move and store. But you must check how much weight they can lift. To use a bottle jack safely, know its limits and follow the rules.
Scissor jacks are light and easy to carry. People use them a lot for roadside problems. Most cars come with a scissor jack and spare tire. Scissor jacks are easy to use, but they cannot lift as much as other jacks. They are best for quick tire changes on small cars.
Jack stands hold up the car after it is lifted. They keep the car steady and stop accidents. Always make sure the jack stands can hold the car’s weight. Jack stands touch the car in more than one place, so the car is less likely to fall. They are very important for anyone learning to use a car jack.
Overloading is a very risky mistake when lifting cars. You should always follow safety rules and never lift more than the tool can handle. Too much weight can make the tool tip over or break. This can hurt you or people close by. Before lifting, check how heavy the car is. Make sure the tool can hold that weight. This helps stop accidents and makes lifting safer and faster. Always look for a flat, strong ground before you start.
Some people do not use jack stands when changing tires. This is a big mistake. Jack stands keep the car steady after it is lifted. You must put jack stands under the right spot every time. Using only a jack can make the car drop or move suddenly. For regular car work, always use jack stands and set the parking brake. This easy step can save lives.
Putting lifting tools in the wrong spot can make cars fall or roll. Always put the jack and jack stands at the right place. Set the parking brake and use wheel chocks to stop movement. If the ground is soft or uneven, accidents can happen. Always check for a flat, strong surface before lifting. Putting tools in the right spot is very important for safety.
Not reading instructions is a common mistake. You must read and follow all safety rules in the manual. Each tool has its own way to use it. If you do not follow the rules, you can get hurt or break the tool. Always use jack stands, set the parking brake, and pick the right tool for the job. Safety means paying close attention to every step.
A good safety routine keeps everyone safe in the workshop. This guide helps people remember what to do before lifting a car. First, park the car on flat ground. This stops the car from rolling or moving during work.
Step | Description |
|---|---|
1 | Look at the lift every day for bad cables, leaks, bent arms, or missing safety labels. |
2 | Make sure the locking devices and safety latches work right. |
3 | Listen to the power unit and controls for strange sounds or problems. |
4 | Check that anchor bolts are tight and the concrete under the baseplates is not cracked. |
5 | Always check safety locks before using the lift to make sure they work. |
6 | Listen for a clear "click" or lock sound as the lift goes up. |
7 | Add oil to moving parts if the manual says to do it. |
8 | Make sure the locking spots line up with the marks on the columns or runways. |
9 | Look for broken or worn parts on the locks and change them right away. |
10 | Check the car lift often to make sure every part works right. |
Checking and fixing lifting tools often keeps them working well. Daily checks find easy-to-see damage or wear. Monthly checks help find hidden cracks or worn-out parts. Every year, a trained engineer should check the tools to make sure they are safe. People should look for oil leaks, rust, or bent metal. Safety locks and latches must always work.
When learning to use a car jack, follow the checklist every time. Do not skip any steps. Flat ground, working safety locks, and regular checks keep everyone safe.
Ensuring safe vehicle lifting operations requires adherence to all procedures. Personnel must inspect tools and wear safety gear. Before repairs, place jack stands under the vehicle to ensure their load capacity meets the vehicle's weight requirements. Repair shops should instruct employees on proper jack stand usage. Jack stands equipped with safety components ensure personnel safety. Always re-inspect jack stand condition before each operation.
Previous Post
NoneNext Post
Top Hand Tools for Engine Maintenance and RepairLatest Blog
Jun. 04, 2024
Contact us for more information
Can't find what you were looking for? We can customize according to your needs.
